What Is a Cantilever Bridge | Type of Cantilever Bridges | Advantages & Disadvantages of Cantilever Bridge

What Is a Cantilever Bridge

Introduction of Cantilever Bridge

The cantilever bridge is a type of bridge. The feature of a cantilever bridge is that it has support on one end and the other end is free.

The first and most modern cantilever bridge was built in 1867 in Germany up to 124 feet (38 m) in the middle of the Hassfurt Bridge over the main river.

The most famous cantilever bridge is the Forth Rail Bridge. The bridge holds the 17-year record for having the longest span in the world.

In this post, you will learn about cantilever bridges, the types of cantilever bridges, and the advantages and disadvantages of cantilever bridges.

What Is a Cantilever Bridge?

Cantilever bridges are primarily designed to handle situations such as road or railway traffic. The cantilever bridge is usually made of structural steel or  Prestressed Concrete.

A cantilever bridge is a structure in which one part acts as an anchor to support the other part. In this type of bridge, a portion extends beyond the pier.

The cantilever bridge is formed when two cantilever arms extend from opposite sides of the other and meet in the middle. The use of cantilever bridges has generally increased around the world to build bridges.

In the suspended span, the cantilever arms do not meet in the center where a central truss bridge is placed, which rests on the ends of the cantilever arms. A suspended span can be created and installed on the site.

A common method of constructing steel truss and prestressed concrete cantilever spans is to form a balanced cantilever by projecting each cantilever arm in the opposite direction to the other cantilever arm. When they connect to a solid base and provide support to the counterbalancing cantilever.

Four cantilever arm construction is usually done on two foundation piers in a cantilever bridge. This type of bridge structure has two anchor arms that extend away from the obstacle and two that span the obstacle.

Balanced cantilever support requires more strength. Due to this, the bridge is constructed like towers on the pillars of the superstructure foundation. Through which the cantilever arms are supported.

Steel truss cantilevers support the load by tensioning the upper part of the member in the bridge and compressing the lower part. Normally the structure in the cantilever bridge distributes the tension through the anchor arms to the outside support, while the compression is transferred through the central towers to the following foundations.

Cantilever bridges are usually built using segmental constructions. Steel arch bridges are usually constructed using cantilever spans on each side. This is then connected to each joint pin while the bridge decking is formed. When the bridge truss arch bridge is ready.

Also Read: Type of Building Materials

Type of Cantilever Bridges

Cantilever bridges are classified into two types as follows.

  • Balance Cantilever Bridges
  • Continuous Cantilever Bridges

1. Balance Cantilever Bridges

Balance Cantilever Bridges

This type of bridge has many advantages over other types of construction in urban areas. Where temporary shoring traffic and services are not required.

This type of method is the simplest method of bridge construction without the need for falsework. Temporary shoring will not disrupt traffic and services in deep valleys below and on waterways. This type of method does not use falsework, so there is a reduction in risk and cost.

Balanced cantilever bridges are used from 50 to 250 m. The balanced cantilever construction method is supported by piers on opposite ends of the cantilevers by alternately connecting different sections.

This balance cantilever bridge method is easily used for irregular and long-span lengths, congested project sites, rough and water terrain, railway crossings, and environmentally sensitive spaces.

In this type of bridge, the construction of permanent pillars proceeds in a balanced mid-span.

Also Read: 6 Types of Pitched Roof | Pitched Roof Design | Pitched Roof Construction

2. Continuous Cantilever Bridges

Continuous Cantilever Bridges

Continuous cantilever bridges are constructed from truss-type bridges. Which is made for extending into two or more supports without joints.

Its design is very simple. It also explains the basic concepts of a normal beam in its composition.

The material used in continuous truss bridges is less than the range of simple trusses. In a continuous truss bridge system, the live load is distributed in all spans. And each truss should be able to support the entire load.

Continuous truss bridges rely on rigid truss connections made in them for their stability.

Advantages of Cantilever Bridge

Advantages of Cantilever Bridge

  1. In this type of bridge, only one side support is provided in each cantilever.
  2. The use of falsework is only required for the pier. Not required for other work.
  3. In this type of bridge, the assembled parts of the suspended bridges can only be connected between two cantilever spans.
  4. Bridge floors are easily built in such parts. Which maintains uniformity and ensures high quality.
  5. Construction of multiple cantilever spans in these bridges can be started by reducing the time required.
  6. There is no traffic obstruction under the bridge during its construction.
  7. In areas with strong rock structures, anchor arms may be connected to the surrounding rock.
  8. The span of a cantilever bridge is longer than a conventional beam.
  9. This type of bridge can withstand the effects of thermal expansion and floor speed.
  10. Supporting piers and supported highway styles add to the geometry of the bridge.

Also Read: What Is a Gambrel Roof Design? | Gambrel Roof Angles

Disadvantage of Cantilever Bridge

Disadvantage of Cantilever Bridge

  1. This type of bridge is not suitable for areas with extremely bad climatic conditions.
  2. These bridges generate high levels of stress during construction.
  3. Compressive and tensile forces are generated in the cantilever bridge. A heavy structure is required for the stability of these forces.
  4. Being part of a joint section in this type of bridge results in disability on the RCC floor.
  5. Extensive analysis is required to prevent cantilever bridge elements and joint failure.
  6. This type of bridge is complex for construction and maintenance due to its large foundation structures.
  7. The cantilever arm of the cantilever bridge requires a large and strong support pier.
  8. In this type of bridge, a truss bridge is connected between two cantilevers in a suspended span for a big span bridge.
  9. This type of bridge is not recommended for use in earthquake-prone areas or low-rock stabilization areas.
  10. These bridge depths can be dangerous or difficult to falsework for rocky valleys and flooded areas.

Like this post? Share it with your friends!

Suggested Read –


Frequently Asked Questions

What Is a Cantilever Bridge?

A cantilever bridge is a bridge built using structures that project horizontally into space, supported on only one end.

Cantilever Bridge

It is called a cantilever bridge because it is built using cantilevers. A cantilever is a structure that is only anchored at one of its ends. Its other end projects horizontally into space, and it is this end that helps support the bridge. It might help to think of a cantilever as being like a diving board.

What Are Cantilever Bridges?

A cantilever bridge is a bridge built using cantilevers, structures that project horizontally into space, supported on only one end. A balcony protruding from a building would be an example of a cantilever.

What Does a Cantilever Bridge Look Like?

A cantilever bridge is generally made with three spans, of which the outer spans are both anchored down at the shore and cantilever out over the channel to be crossed. The central span rests on the cantilevered arms extending from the outer spans; it carries a vertical In bridge.

How Much Does a Cantilever Bridge Cost?

Cost estimates for a cantilever bridge range from $500 to $2,700. Costs vary depending on your location, insurer, and the tooth or teeth being.

What Are the Strengths and Weaknesses of a Cantilever Bridge?

They are strong and reliable but are quite heavy as well. Cantilever bridges have each pier supporting the weight of two horizontal beams in opposite directions. They are strong and reliable but are quite heavy as well.

How Does a Cantilever Bridge Work?

Cantilever Bridge A structure at least one portion of which acts as an anchorage for sustaining another portion that extends beyond the supporting pier. A simple cantilever span is formed by two cantilever arms extending from opposite sides of an obstacle to be crossed, meeting at the center.

How Is a Cantilever Bridge Built?

Construction. A cantilever bridge is generally made with three spans, of which the outer spans are both anchored down at the shore and cantilever out over the channel to be crossed. The central span rests on the cantilevered arms extending from the outer spans; it carries vertically.

What Are the Disadvantages of a Cantilever Bridge?

Although cantilever bridges typically last for years, there is a higher chance of failure when bridges are not attached to the sturdier teeth found at the back of the mouth. Damage may occur. Because they are only anchored on one side, there is a slightly higher risk of cracking or debonding than with other bridges.

What Are the Advantages and Disadvantages of a Cantilever Bridge?

Advantages:

  1. They are less invasive.
  2. They look natural.
  3. Cheaper alternative.
  4. Their longevity makes them attractive.

Disadvantages

  1. They aren’t for everyone.
  2. They could fail.
  3. Damage may occur.

Where Is the Cantilever Bridge Located?

Quebec Bridge is the world’s longest cantilever road bridge, with a main span length of 549m. The bridge crosses the lower Saint Lawrence River, linking Quebec City and Lévis, Quebec. The bridge has an overall length of 987m, was completed in 1917, and opened to traffic in 1919.

What Is Balanced Cantilever Bridge?

The Balanced Cantilever Method refers to a construction method that does not install scaffolding systems under the bridge and completes the superstructure of the bridge by sequentially joining the segments to form a span by post-tensioning and balancing them left and right from each pier using special erection.

Famous Cantilever Bridge

The Commodore Barry Bridge is an example of this type of cantilever bridge. The most famous example of this type of bridge is the Forth Railway Bridge in Scotland, which was the longest span in the world from 1890 until 1919 when the Quebec Bridge in Canada was built.

Leave a Comment