Slump Test

Generated Image

Introduction of Slump Test

A slump test is a field test used to determine the consistency of concrete. It is performed to check the workability of freshly made concrete, and therefore the strength and durability of the concrete once it has hardened.

Objectives of the Slump Test

  • To determine the workability of concrete, the Slump Test is performed
  • The equipment needed for this test is a slump cone, a trowel, a 16 in (406.4 mm) ruler, and a stopwatch
  • The slump cone is placed in the middle of the concrete sample
  • The trowel is inserted into the top of the slump cone, and the concrete is lifted out of the slump cone in a single, continuous motion
  • The ruler is placed on top of the concrete, and the stopwatch is started
  • The concrete is allowed to fall for 5 seconds, and then the stopwatch is stopped
  • The distance from the top of the concrete to the bottom of the concrete is measured
  • This is the slump
  • The slump test is repeated 3 times, and the average slump is recorded.

General Test Procedure

  • There is no general test procedure that is universally applicable to all products
  • However, there are some general steps that can be followed when conducting a test:

    1

  • Define the objectives of the test and the criteria that will be used to determine whether the test is successful.

    2

  • Develop a test plan that outlines the approach that will be used to test the product.

    3

  • Execute the test plan and record the results.

    4

  • Analyze the results and report the findings.

Conclusion

The slump test is a quick and easy test to determine the workability of concrete. It is especially useful on site as it can be carried out with minimal equipment and without having to wait for the concrete to set. The slump test can be used to estimate the water/cement ratio of the concrete, which is a major factor affecting the strength and durability of concrete.

Frequently Asked Questions

What is the slump test and what is it used for?

The slump test is a field test used to determine the consistency of concrete. It is performed to check the workability of freshly made concrete, and therefore the strength and durability of the concrete once it has hardened.

What is a slump test?

The Slump Test is a field test used to determine the consistency of concrete. It is performed to check the workability of freshly made concrete, and therefore the strength and durability of the concrete once it has hardened.

How do you perform a slump test?

A slump test is performed by placing a slump cone in the middle of a concrete sample, and then inserting a trowel into the top of the cone. The concrete is lifted out of the cone in a single, continuous motion, and a ruler is placed on top of the concrete. The stopwatch is started, and the concrete is allowed to fall for 5 seconds. The stopwatch is then stopped, and the distance from the top of the concrete to the bottom of the concrete is measured. This is the slump. The slump test is repeated 3 times, and the average slump is recorded.

Leave a Comment