## Weight of Number 3, 4, 5, 6, 7, 8, 9 & 10 Rebar Per Foot

The weight of rebar or reinforcement bars per foot can vary depending on the size and type of rebar.

The weight is generally calculated in kilograms per meter (kg/m) or pounds per foot (lb/ft).

Here are we provide some of the approximate weights in kilograms per foot for common rebar sizes-

### #3 Rebar-

Also known as 10M, this rebar has a diameter of 3/8 inch (9.525 mm) and weighs around 0.56 kg per foot.

### #4 Rebar-

Also known as 13M, this rebar has a diameter of 1/2 inch (12.7 mm) and weighs around 0.99 kg per foot.

### #5 Rebar-

Also known as 16M, this rebar has a diameter of 5/8 inch (15.875 mm) and weighs around 1.55 kg per foot.

### #6 Rebar-

Also known as 19M, this rebar has a diameter of 3/4 inch (19.05 mm) and weighs around 2.24 kg per foot.

### #7 Rebar-

Also known as 22M, this rebar has a diameter of 7/8 inch (22.225 mm) and weighs around 3.04 kg per foot.

### #8 Rebar-

Also known as 25M, this rebar has a diameter of 1 inch (25.4 mm) and weighs around 3.93 kg per foot.

### #9 Rebar-

Also known as 29M, this rebar has a diameter of 1 1/8 inches (28.575 mm) and weighs around 5.05 kg per foot.

### #10 Rebar-

Also known as 32M, this rebar has a diameter of 1 1/4 inches (31.75 mm) and weighs around 6.41 kg per foot.

The above weights are inexact and based on the specific composition can vary and also depend on the manufacturer of the rebar.

Always consult with engineering and construction professionals for accurate and up-to-date information.

## How Much Does 3 Rebar Weigh Per Foot?

A 3 rebar, also known as a 3/8-inch diameter rebar, typically weighs around 0.376 pounds per linear foot.

This weight may vary slightly based on specific manufacturing standards and variations in steel density.

In concrete structures, the rebar is generally used as reinforcement, providing strength and durability to building projects.

**Useful Article for You**

- Weight of Concrete
- Weight of a Gallon of Milk
- Weight of a Cinder Block
- Weight of 1 Yard of Gravel
- Weight of a Gallon of Oil
- Weight of Sand Vs Water
- How Much Does It Cost to Pump a Septic Tank
- How Much Does a Heated Driveway Cost
- How Much Concrete for a Fence Post
- How Much Space for Toilet
- How Much Does It Cost to Paint a Brick House
- How Much Value Does a Garage Add to a House
- How Much Room Do You Need Around a Pool Table
- How Much Does a Cement Truck Weigh
- How Much Water for 60 Lb Bag of Quikrete
- How Much Does Home Depot Charge to Cut Wood
- How Much Space Between Kitchen Island and Counter
- How Much Are Wolf Ranges
- How Much Does It Cost to Remove and Replace Grout
- How Much Does an Aerobic Septic System Cost

## How Much Does 4 Rebar Weight Per Foot?

The 4 rebar, also known as a Number 4 rebar, is a typical type of steel reinforcement bar that is used in structure work.

It has a nominal diameter of 0.5 inches or 12.7 millimeters. The weight of a #4 rebar per linear foot can be calculated using the formula-

- Weight (lbs/ft) = (Diameter^2 / 162.8) * 12. And Substituting the diameter of 0.5 inches into the formula-
- Weight (lbs/ft) = (0.5^2 / 162.8) * 12 = 0.01942 lbs/ft

So, a #4 rebars weigh approximately 0.01942 pounds per linear foot.

This weight is used to estimate the total weight of rebar required for a specific construction project, helping engineers and builders ensure structural integrity and safety.

Keep in mind that this is an approximate value and actual weights can vary slightly due to manufacturing tolerances.

## How Much Does 5 Rebar Weight Per Foot?

A typical 5 rebar, also known as a 5/8-inch diameter rebar, weighs around 1.043 pounds per linear foot.

Keep in mind that this weight may vary slightly based on the specific composition of the rebar and any coatings it might have.

If you need more accurate and current data, it’s recommended to consult a trusted authority or the manufacturer.

## How Much Does 6 Rebar Weigh Per Foot?

A typical 6 rebar, also known as a “Number 6” rebar, weighs around 1.502 pounds per linear foot.

You have to remember that relying on the alloy used and the specific manufacturer the weight may vary slightly.

Rebar weight is an important consideration in construction projects to ensure the structural integrity and stability of the concrete structures they are used in.

Also Read: 10 Free Outdoor Fireplace Construction Plans

## How Much Does 7 Rebar Weight Per Foot?

A 7 rebar, also known as a No. 7 rebar, typically weighs around 2.17 pounds per linear foot.

In concrete structures, the rebar is used as a steel reinforcement to provide added strength and stability.

The “#7” refers to the bar’s diameter, which is 7/8 of an inch (22.2 millimeters). The weight per foot can vary slightly depending on the specific manufacturing standards and material composition.

Keep in mind that rebar weight is an important consideration in construction projects to ensure structural integrity and proper load-bearing capacity.

**Useful Article for You**

- How Many Cinder Blocks on a Pallet
- How Many 60lb Bags of Concrete on a Pallet
- How Many Bags of Concrete to Fill a 8” Sonotube
- How Many Gallons Is a Septic Tank
- How Many 60 Lb Bags of Concrete in a Yard
- How Many 50 Pound Bags of Concrete Per Fence Post
- How Many Charcoal Briquettes to Use for 400 Degrees
- How to Remove Texture from Walls
- How to Choose Roof Color for Red Brick House
- How Much Does a Mound Septic System Cost
- How to Hide Hairline Cracks in Concrete
- How Thick Should a Sidewalk Be
- How Do I Know If My Septic Pump Is Working
- How Much Do Pavers Make
- How Much to Install Tongue and Groove Ceiling
- Vault Toilet
- Sill Plate
- What Is a Table Shower
- Water Leaking from Ceiling
- What Is a Brad Nailer

## How Much Does 8 Rebar Weigh Per Foot?

An 8 rebar, also known as #8 rebar, typically weighs around 2.67 pounds per linear foot.

It’s essential to consider the weight of rebar when planning construction projects, as it contributes to the overall load and structural integrity.

The weight per foot can vary slightly based on the specific manufacturer and the alloy used.

It’s advisable to consult engineering references or supplier specifications for precise weight information before incorporating rebar into your project.

## How Much Does 9 Rebar Weigh Per Foot?

A 9 rebar, also known as a “Number 9” rebar, typically weighs around 1.00 pounds per linear foot.

The weight can vary slightly based on the specific composition and manufacturer, but this is a common estimate.

Keep in mind that rebar weight may also be affected by factors such as coatings and variations in manufacturing processes.

If you require precise weight information, it’s best to consult the manufacturer’s specifications or a reliable source in the construction industry.

## How Much Does 10 Rebar Weight Per Foot?

A 10 rebar, which is also known as a 1.27-inch diameter rebar, typically weighs around 7.65 pounds per linear foot.

Keep in mind that rebar weights can vary slightly based on the specific composition and manufacturing process.

It’s always a good decision to talk with the manufacturer’s specifications for accurate weight knowledge.

## Weight of Reinforcing Steel

Reinforcing steel, commonly referred to as rebar, plays a crucial role in the construction industry by providing strength and durability to concrete structures.

Its weight is a significant consideration during the design and construction phases.

The weight of reinforcing steel varies depending on its diameter and length.

Generally, rebar is manufactured in various diameters, ranging from 6mm to 50mm or more, with standard lengths of 6, 9, 12, or 15 meters.

The weight of a single rebar can be calculated using the formula- Weight (kg) = (D^2 / 162) x L

Where-

D is considered the diameter of the rebar in millimeters and L considers the length of the rebar in meters.

For example, a 12mm diameter rebar with a length of 6 meters would weigh approximately 2.37 kg.

During construction, engineers and architects must carefully consider the weight of reinforcing steel as it impacts the overall load-bearing capacity of a structure, the amount of concrete required, and the transportation logistics.

Balancing these factors is crucial to ensuring the safety and stability of the finished construction project.

Also Read: Free-Standing Retaining Wall with Types

## How Much Weight Can Rebar Hold?

The weight that a rebar can hold depends on various factors such as its diameter, grade, length, and the specific construction application it’s being used for.

Reinforcement bars, in short, known as rebar, are primarily used in concrete structures to provide tensile strength.

The load-bearing capacity of rebar is influenced by its quality, the concrete’s strength, and the engineering design of the structure.

Engineers calculate the load-bearing capacity of rebar using mathematical formulas and structural analysis techniques to ensure safety and structural integrity.

If you have a specific scenario or type of rebar in mind, I can provide more detailed information.

## How to Calculate Rebar Weight?

There are many steps for calculating rebar weight, that’s are below-

### Determine Rebar Dimensions-

Measure the length, width, and diameter of the rebar in inches or millimeters.

The width is usually consistent, while the diameter can vary.

### Calculate Cross-sectional Area-

For a round rebar, calculate its cross-sectional area using the formula for the area of a circle- A = π * (diameter/2)^2. If the rebar is not round, calculate the area according to its shape.

### Convert Units-

Convert the cross-sectional area from square inches or square millimeters to square feet or square meters, depending on your preference for final weight units.

### Calculate Volume-

Multiply the cross-sectional area by the length of the rebar to get its volume. The formula is Volume = Area * Length.

### Convert Units Again-

Convert the volume from cubic inches or cubic millimeters to cubic feet or cubic meters.

### Determine Density-

The density of steel is around 490 pounds per cubic foot (lb/ft³) or 7850 kilograms per cubic meter (kg/m³). Use the appropriate value based on your preferred units.

### Calculate Weight-

Multiply the volume by the density to get the weight of the rebar. The formula is Weight = Volume * Density.

But you have to remember that these calculations give you the weight of a single rebar.

If you’re dealing with multiple rebars, simply multiply the weight of one rebar by the total number of rebars.

It is crucial to point out that these analyses assume the rebar is made of standard steel and is uniformly dense.

If you’re working with specialized materials or irregular shapes, the calculations might differ.

### Weight of 6 Rebar: –

A typical 6 rebar (also known as #6 rebar) weighs around 0.888 pounds per linear foot or 13.32 pounds per 20-foot piece.

Keep in mind that rebar weight can vary slightly based on the specific manufacturing standards and processes used.

## 3 Rebar Weight Per Foot

The weight of #3 rebar per foot is approximately 0.376 pounds or about 0.170 kilograms.

This type of rebar is generally used in structures for different objectives, like reinforced concrete structures and slabs, walls, and footings.

If you need precise calculations for your project, it’s recommended to consult with a structural engineer or refer to official engineering references.

## 4 Rebar Weight Per Foot

The weight of a #4 rebar which is also known as No. 4 rebar per foot varies depending on the standard used for measurement, whether it’s in pounds or kilograms.

In the United States, a #4 rebar typically weighs around 0.67 pounds per linear foot or approximately 0.996 kilograms per meter.

## 5 Rebar Weight Per Foot

The 5 rebar or #5 rebar, also known as “size 5” rebar, is a common type of reinforcing steel bar used in construction and concrete reinforcement.

The “#5” refers to its nominal diameter, which is 5/8 of an inch or approximately 15.875 millimeters.

The weight of 5 rebars per foot can be calculated using the formula: Weight (lb/ft) = Diameter (in)^2 * 0.668.

Plugging in the diameter for #5 rebar (5/8 inch), the weight comes out to be approximately 0.668 pounds per linear foot.

But you have to remember that these calculations are inexact and can vary barely due to manufacturing tolerations and other factors.

It’s always a good idea to consult with engineering and construction professionals to get precise measurements for your specific project.

## 6 Rebar Weight Per Foot

The weight of #6 rebar, which is commonly used in construction, can vary slightly based on the specific material and manufacturing standards.

On average, #The 6 rebar weighs around 0.888 pounds per linear foot or 1.32 kg per meter.

It’s significant to point out that this weight can differ relying on aspects such as the specific alloy composition and any additional coatings or treatments applied to the rebar.

Proper handling and installation of rebar are crucial to ensuring the structural integrity of reinforced concrete projects.

## 7 Rebar Weight Per Foot

The 7 rebar, also known as a “Number 7” rebar, refers to a type of reinforcement steel bar that is often used in construction projects to provide structural support to concrete structures such as buildings, bridges, and highways.

The “#7” designation indicates the nominal diameter of the rebar in inches.

The weight of #7 rebar per foot can vary slightly depending on the specific type and grade of rebar being used, but a typical #7 rebar weighs approximately 2.25 pounds per linear foot.

This weight can be useful for calculating the total weight of rebar required for a particular project or determining the load-bearing capacity of a concrete structure.

It’s important to note that rebar is available in various grades, with each grade having different mechanical and physical properties.

The weight per foot can also be affected by factors such as coatings that are applied to the rebar for corrosion protection.

Early in using rebar in any structural project, it’s suggested to talk with a structural engineer or a construction professional to assure that the suitable type, grade, and quantity of rebar are being used to fulfill the specific design and safety requirements of the project.

## 8 Rebar Weight Per Foot:

The 8 rebar, also known as No. 8 rebar, is a type of reinforcing steel bar commonly used in construction and concrete applications.

It is a medium-sized rebar with a diameter of approximately 1 inch or 25.4 mm.

The weight per foot of #8 rebar varies based on its length and the density of the material, which is usually steel.

On average, the weight of #8 rebar per foot is approximately 2.67 pounds or 1.21 kilograms.

However, it’s important to note that this weight can vary slightly depending on factors such as the specific steel composition, manufacturing standards, and any coatings or treatments applied to the rebar.

Builders and engineers use #8 rebar to reinforce concrete structures, providing additional strength and durability to various types of constructions such as buildings, bridges, highways, and more.

The weight per foot is a crucial consideration in construction projects, as it helps in estimating the total weight of rebar required for a specific project and ensures that the reinforcement meets the engineering specifications and load-bearing requirements.

When using #8 rebar in construction, it’s crucial to consult engineering guidelines and follow relevant building codes to ensure that the rebar is properly placed, restrained, and used to optimize the structural virtue of the final construction.

## 9 Rebar Weight Per Foot:

The weight of 9 rebar, which is a type of reinforcing steel bar used in construction, varies based on its length.

On average, #9 rebar weighs approximately 1.044 pounds per linear foot or around 15.6 pounds per 20-foot length.

But you have to remember that these values can narrowly vary based on the manufacturer and specific alloy used.

The 9 Rebar is commonly used in heavy-duty construction projects to provide structural reinforcement to concrete structures such as foundations, retaining walls, and bridges.

## 10 Rebar Weight Per Foot:

A #10 rebar, also known as a “Number 10 rebar,” is a steel reinforcing bar commonly used in construction to deliver structural support to concrete structures.

The “#10” refers to the nominal diameter of the rebar, which is approximately 1.27 inches or 32.3 millimeters.

The weight of #10 rebar per foot can vary depending on the specific steel composition and manufacturing standards, but it’s normally around 7.65 pounds per linear foot or 11.4 kilograms per meter.

This weight per foot measurement is vital for engineers and construction professionals to accurately compute the weight and distribution of reinforcement within concrete projects.

Adequately calculating the rebar weight helps assure the structural virtue and load-bearing capacity of the concrete structure.

## Number 5 Rebar Weight Per Foot: –

The 5 rebar, also known as No. 5 rebar per foot, is approximately 1.043 pounds or 0.473 kilograms (kg).

This value of the 5 rebars can slightly vary the basis on the specific manufacturer and the exact dimensions of the rebar.

**Frequently Asked Questions (FAQs):**

### How Much Does 4 Rebar Weight Per Foot?

0.668 pounds per foot

Physical characteristics of #4 Rebar:

Weight per unit length: **0.668 pounds per foot** (0.996 kilograms per meter) Nominal diameter: 0.5 inches (12.7 millimeters)

### How Much Does 5 Rebar Weight Per Foot?

Physical Characteristics of #5 Rebar:

Weight per unit length: **1.043 pounds per foot** (1.556 kilograms per meter)

### Weight of Reinforcing Steel

The weight of the rebar depends on its diameter and length. **A linear foot of #2 or 1/4″ diameter rebar weighs 0.167 lbs., #3 or 3/8” weighs 0.376 lbs., and #4 or 1/2″ rebar weighs 0.688 lbs.**

### How Much Weight Can Rebar Hold?

Rebars are typically used in reinforced concrete beams, columns, slabs, and other structural elements. The weight they can hold is determined by their ability to provide reinforcement against the tensile forces that occur in these structures.

### How to Calculate Rebar Weight?

**W= (D2/162.28)* L**

Where ‘D’ and ‘L’ are the diameter and the length of the rebar respectively. Take the value of diameter in terms of millimeter and length in terms of meters. You will get the results in kilograms (Kg).

### How to Calculate Rebar Weight in Kg?

**W= (D2/162.28)* L**

Take the value of diameter in terms of millimeter and length in terms of meters. You will get the results in kilograms (Kg). After dividing the results with the actual length of rebar you can get the weight per meter run.

### 3 Rebar Weight Per Foot

3 Rebar Physical Characteristics:

Weight per unit length: **0.376 pounds per foot** (0.561 kilograms per meter) Nominal diameter: 0.375 inches (9.525 millimeters)

### 3 4 Rebar Weight Per Foot

A #3 rebar, also known as a 3/8-inch diameter rebar, weighs approximately 0.376 pounds per linear foot. Similarly, a #4 rebar, which is a 1/2-inch diameter rebar, weighs around 0.668 pounds per linear foot. These weights are approximate and can vary slightly based on the specific composition of the rebar and any coatings it might have.

### 4 Rebar Weight Per Foot

0.668 pounds per foot

Physical characteristics of #4 Rebar:

Weight per unit length: **0.668 pounds per foot** (0.996 kilograms per meter)

### 5 Rebar Weight Per Foot

A #5 rebar, also known as a 5/8-inch diameter rebar, weighs approximately 1.043 pounds per linear foot. Just like with other rebar sizes, this weight is an approximation and can vary based on factors such as the exact composition of the rebar and any coatings it may have.

### 6 Rebar Weight Per Foot

Physical Characteristics of #6 Rebar:

Weight per unit length: **1.502 pounds per foot** (2.24 kilograms per meter) Nominal diameter: 0.75 inches (19.05 millimeters)

### 7 Rebar Weight Per Foot

Physical characteristics of #7 Rebar:

Weight per unit length: **2.044 pounds per foot** (3.049 kilograms per meter)

### 8 Rebar Weight Per Foot

Physical Characteristics of #8 Rebar:

Weight per unit length: **2.67 pounds per foot** (3.982 kilograms per meter) Nominal diameter: 1.000 inches (25.4 millimeters)

### 9 Rebar Weight Per Foot

Specifications For #9 Rebar:

Weight per unit length: **3.4 lbs/ft**, 5.071 kg/m.

### 10 Rebar Weight Per Foot

4.303 pounds per foot

Physical Specifications of #10 Rebar:

Weight per unit length: **4.303 pounds per foot**; 6.418 kg/m.

### Number 5 Rebar Weight Per Foot

Physical Characteristics of #5 Rebar:

Weight per unit length: **1.043 pounds per foot** (1.556 kilograms per meter) Nominal diameter: 0.625 inches (15.875 millimeters) Nominal area: 0.31 square inches (200 square millimeters)

### How Much Does 1 2 Rebar Weight?

A linear foot of #2 or 1/4″ diameter rebar weighs 0.167 lbs., #3 or 3/8” weighs 0.376 lbs., and #4 or 1/2″ rebar weighs 0.688 lbs. Multiplying the weight per foot of a specific diameter identifies the weight of the length. So, an 8-foot piece of #4 rebar will weigh 5.504 pounds, and a 20-foot length 13.76 pounds.

### How Much Does Rebar Weight Per Foot?

- #2 Rebar (1/4 inch diameter): Approximately 0.167 pounds per linear foot
- #3 Rebar (3/8 inch diameter): Approximately 0.376 pounds per linear foot
- #4 Rebar (1/2 inch diameter): Approximately 0.668 pounds per linear foot
- #5 Rebar (5/8 inch diameter): Approximately 1.043 pounds per linear foot
- #6 Rebar (3/4 inch diameter): Approximately 1.502 pounds per linear foot

### Rebar Calculation Formula

- If it is standardized rebar, find the manufacturing code and check its density.
- With the length ( L ) and diameter ( d ) of the rebar, calculate the rebar volume using: (3.14 × d² / 4) × L .
- Multiply the volume by the material density. Now, you have the rebar weight.

**Like this post? Share it with your friends!**

**Suggested Read-**

- All About Green House Color Schemes | Things to Know When Choosing Green Siding Colors | What Are the Different Siding Parts Called
- How Much Does a Gallon of Oil Weigh | Oil Weight Vs. Water Weight | How to Calculate the Weight of a Gallon of Oil
- All About Concrete Bags Equal a Yard | How Many Concrete Bags Equal A Yard | Steps To Estimate Cubic Yards Measuring Your Space
- How Much Does a Yard of Concrete Weight | Concrete Weight Per Cubic Foot | Concrete Weight Per Cubic Yard
- How Much Space Do You Need for a Pool Table?

## Leave a Reply