How Many Cubic Yards in a Ton of Asphalt?

A ton of asphalt contains about 0.5 cubic yards per cubic yard. And a cubic yard of asphalt weighs 4,050 pounds, and 1 ton of asphalt weighs about 2,000 pounds.

So the number of yards of asphalt in a ton = 2000 ÷ 4050 = 0.5 yards. Thus, one ton of asphalt contains 0.5 cubic yards.

If you want to calculate the weight of asphalt per yard, Wiley’s Paving notes that one cubic yard of hot asphalt mix weighs 2.025 tons.

If you have that provident yards from tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project’s material.

Asphalt is a common material used in roads, highways, airbases, parking lots, and many other types of tollways, driveways, roadways, patios, driveways, and concrete works, made from a mixture of aggregate, sand, and bitumen. It is also called asphalt or blacktop.

A binder binds the aggregate together to form a cohesive mixture. The most commonly used hydrocarbons are binders.

Most roads in the United States use asphalt because it is durable and long-lasting. It is easy to operate with secondary repairs and withstand adverse weather conditions like extreme cold.

It consists of a mixture of aggregate, sand, and bitumen, where the bitumen acts as a liquid binding material that holds the asphalt together.

We can also say that bitumen acts as a concrete material, and their binder material behaves like cement as a binding material for bitumen sidewalks.

It is black, so the snow melts quickly. When using asphalt, you need to get the right size to save costs, as it is costly.

Standard Weight:

Asphalt = 110 LBS per the inch per SY
1 inch of the asphalt = 110 LBS/SY
1.5-inch of the asphalt = 165 LBS/SY
2.0 inches of the asphalt = 220 LBS/SY

Example:

Asphalt – How many tons of asphalt capacity are needed to build a road 1 mile 24 FT wide with 2 inches of asphalt?

1 mile x 5,280 LF/mile = 5,280 LF x 24 FT = 126, 720 SF / 9 = 14,080 SY x 2 inches x 110 LBS / 2000 = 1,548 tons.

Also Read: How Much Does a Yard of Dirt Weight?

Asphalt Tons Per Cubic Yard

If you count the yards from that ton of asphalt, multiply your cubic yard value by 2.025 per ton to determine the design amount. For example, if you buy ten cubic yards of asphalt, multiply it by 2.025.

You get 20.25 tons of asphalt required for the project amount. Mathematical calculations are cubic yards × 2.025 = tons, 10 × 2.025 = 20.25 US tons.

Asphalt Weight Per Cubic Yard

A cubic yard of hot mix asphalt weighs approximately 2.025 tons or an average of 4050 pounds. Milled asphalt or milled reclaimed pavement (RAP) weighs approximately 3240 to 3780 pounds per yard, ranging from 120 lbs/ ft^3 to 140 lbs/ ft^3.

How Much Is a Tonne of Asphalt?

A ton of asphalt usually costs per square foot. The cost per ton is $40 to $80, and per foot is $0.75 to $2.00.

Also Read: How Much Sand Do I Need for Pavers?

How Many Tons of Asphalt in a Cubic Yard?

If you want to count the weight of asphalt per yard, Wiley’s Paving notes that one cubic yard of hot asphalt mix weighs 2.025 tons.

If you are calculating yards from tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project total.

A cubic yard of asphalt contains approximately 2 tons. A cubic yard of asphalt weighs 4,050 pounds, and 1 ton of asphalt weighs 2,000 pounds.

So, the number of tons of asphalt in one yard = 4050 ÷ 2000 = 2 tons approx. Thus, one cubic yard of asphalt contains 2 tons.

Like this post? Share it with your friends!

Suggested Read –

• Density of Cement Kg/m3
• Type of Building Materials
• Wind Damage Roof Insurance Claim
• 11 Different Types of Wood and Their Uses
• Fire Exit Stairs Design | Fire Escape Staircase Regulations
• What Is Plum Concrete? | Plum Concrete Meaning | Plum Concrete Ratio